Window & Door Framing
Window and Door frame including window bottom.
At Clive Walker Timber we listen to what our customers want and we have found that there is still a good demand for traditional window and door frame sections .
The sections are available to view on the pdf on this page. We have both softwood (scand 5ths Redwood) and hardwood (sapele/ meranti.) in various lengths.
We keep timber window bottom in ex 9” and 12” widths although nowadays it is machined from Southern Yellow Pine instead of the almost impossible to source Parana Pine. We also do the pre primed MDF and red hardwood from stock.
Our machine shop facility means we can manufacture our own window bottom. Therefore if required we can supply it in various species of hardwood (oak, ash, sapele, walnut etc) and in non standard depths and thicknesses.
The external door framing is machined from ex 63mm x 100mm (57mm x 95mm finished size) and is available in softwood and hardwood with a 12mm x 45mm rebate.
The internal door frames are ex 38mm x 100mm/115mm/138mm/150mm and rebated (12mm x 35mm) as oppose to having a loose lath. They come in shrink wrapped sets. We can offer wider or thicker sections through our machine shop if required. We can also machine to order door frames/linings in various hardwoods.
The ½ hr section is ex 63mm x 100mm/115mm/138mm/150mm and rebated (25mm x 45mm with a 15mm intrumescent strip groove) They come in shrink wrapped sets of two 2.1m legs and a 1.0m head.
Through XL joinery we can supply ready made window and door frames of the highest quality. Have a look through there brochure and fill in our enquiries page if there is anything of any interest on there.